Lowest cost and easiest way to eliminate green hair, bubble, turf and slime algae

Discussion in 'Algae' started by SantaMonica, May 6, 2012.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. SantaMonica

    SantaMonica Fire Shrimp

    Joined:
    Jun 15, 2008
    Messages:
    305
    Location:
    Santa Monica, CA, USA
    Lowest cost and easiest way to eliminate green hair, bubble, turf and slime algae from your aquarium (hopefully permanently).

    This new test version of the algae scrubber is much easier to build than the waterfall version (the Mega Powerful one), and is perfect for nano's. This new scrubber has never been posted before May 2012. It works in both freshwater and saltwater.

    If you are like most aquatic hobbyists, nuisance algae is an ongoing problem. You try to feed your livestock, and the next thing you know, you get algae. You've already tried many fixes; some work but are expensive; some kind of work but you're not sure; and some just don't work at all.

    Think about what is happening: Your aquarium is accumulating nutrients (nitrate and phosphate) because of the food you feed. Algae eat nitrate and phosphate to grow, so the algae are having a great time growing in your water because they are eating all your nutrients! What to do?

    Well think about this: In order to grow, algae must be provided with nitrate and phosphate. So why can't you just use the algae to consume all the nitrate and phosphate? The answer: You can! How? With a simple device you build called an Upflow Algae Scrubber. It's simple, cheap, and you can make a small one in just a few minutes with parts you probably already have. I'll be posting more complex versions later, but here are some pics of the most basic design that you can use for testing:

    (will be updated periodically)
    [​IMG]




    An "algae scrubber" is a simple filter that actually grows algae in the filter, so that the algae do not grow in other parts of your aquarium. Simply put, the conditions for algae growth inside the filter are better than the conditions in the rest of your aquarium; thus the algae grow in the filter instead of your aquarium, and then you just remove the algae from the filter and throw the algae away. But in order for the algae to grow in the filter, the algae need to consume nitrate and phosphate; so guess where the nitrate and phosphate come from? Your water!

    If you stop and think about it, algae always grow in certain spots, and not in others. This is because some of the three growing conditions (light, flow, nutrients) are better in some parts of your water than they are in others. An "upflow algae scrubber" simply optimizes these conditions, and does so at a place where the algae can be easily removed and thrown away. And once the nitrate and phosphate have been removed from your water, all other nuisance algae such as green hair, bubble, turf and slime, will have a hard time staying alive.

    So where have these filters been all this time, and why haven't you heard of them if they work so well? Well the original waterfall version (the Mega Powerful thread posted in August 2008) was hard to build, and was not really for sale anywhere; so unless you liked to build things from scratch, you had no choice but to buy some other kind of filter. All the filter really needed to do was to create good growing conditions (light, flow, nutrients) for the algae, by flowing the water across a piece of rough material, so that the algae would grow on the material instead of somewhere else in the aquarium. The waterfall algae scrubber did grow lots of algae in the filter, and it removed lots of algae from aquariums: Over 1,000 people built their own waterfall algae scrubbers, and reported their results on various forums during a 4 year period; almost all of them wiped out their nuisance algae within 8 weeks, and many did so in 4 weeks. And on other forums that I never posted on, an estimated 10,000 people built their own waterfall algae scrubbers with similar results.

    A little over a year ago in April 2011, another idea came along: Instead of letting the water flow down a screen like a waterfall, how about you let the water flow up the screen using air bubbles? Why? Because as good as waterfall algae scrubbers are, they still need a place for the water to drain "down" to. This means that you need to have a sump below the aquarium, or you need to have the scrubber up above the aquarium. This is not easy, and is very difficult for a nano aquarium which usually has no sump below it, and no room above it. Also, the waterfall version requires it to be out of the water (in the air), which takes up extra space. The new "upflow" version, however, can be placed inside the aquarium, so that it takes up no extra space at all, and it needs no external plumbing or water pumps at all. Only air bubbles.

    The Upflow Algae Scrubber (UAS) provides the best growing conditions for algae in your tank: Air bubbles provide rapid turbulent flow; Strong lighting provides the light; and the nutrients that are already in your water provide the nitrate and phosphate. All that's needed is a place for the algae to attach to, and that is provided by the roughed-up plastic screen. Thus the algae start growing on the screen because the flow and lighting are stronger there than they are in the rest of your aquarium; nitrate and phosphate are consumed in the process. This causes algae to start disappearing from your aquarium and start re-appearing on the scrubber screen, so that you can throw the algae away every week or two.

    The most basic way to set up an Upflow Algae Scrubber, especially in small aquariums, is just to put some air bubbles beneath a vertical screen. If inside an aquarium, you just put a light on the outside of the glass, so that it shines inside to the screen. And if you want better performance (which means better filtering), just add a reflector to give the screen some light on both sides. The screen is best made with 7-mesh cross stitch plastic canvas that you get at sewing or craft stores, or online. Also, don't forget to rough up the screen with a sharp object like a hole saw; the screen should be so rough that the screen holes are almost filled in with all the little pieces of plastic that you roughed up.

    One thing to remember is that an Upflow Algae Scrubber (or any algae scrubber) will not cause more algae to grow in your aquarium. Instead, the algae will disappear from your aquarium, and will start to grow on the scrubber screen instead. You then just remove the screen and scrape the algae off. And here's a surprise: Watch out for your fish or snails eating your filter! There's nothing tastier than live green algae, so your fish or snails may keep your screen from getting very thick. The simple solution is to just put some mesh or netting around it.

    There are a couple of requirements that have been learned since August 2008 which will get you started quicker. The size of the Upflow Algae Scrubber that is needed is based on how much you feed, and not how much water you have, because the nutrients that cause algae to grow come from the food you feed. The following updated picture has size guidelines:

    (will be updated periodically)
    [​IMG]




    And the following updated picture has examples:

    (will be updated periodically)
    [​IMG]




    So build a UAS and post your pictures!
    .
    .
    .
     
  2. Click Here!

  3. SantaMonica

    SantaMonica Fire Shrimp

    Joined:
    Jun 15, 2008
    Messages:
    305
    Location:
    Santa Monica, CA, USA
    OK some growth pics...

    Floyd R Turbo on the GIRS site:
    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]



    Rkyrickstr on the TF site:
    [​IMG]

    [​IMG]



    Ruddybop on the MFK site:
    [​IMG]



    Fishuntbike on the scrubber site:
    [​IMG]

    [​IMG]

    [​IMG]



    And mine...
    [​IMG]
     
    1 person likes this.
  4. elweshomayor

    elweshomayor Giant Squid

    Joined:
    Jul 6, 2009
    Messages:
    3,962
    Location:
    Norcross, Atlanta Ga.
    It's a great article.. I had a little hard time following though.

    So, basically.. in simple terms.. Get an eggcrate or a mesh.. put it in the refugium or wherever you have lots of water flowing. Point lights to it and wait for the alage to grow.. Clean, start over?

    Wouldn't that be also like how a refugium works?
     
  5. Reef4life

    Reef4life Feather Duster

    Joined:
    Jun 6, 2011
    Messages:
    226
    Great Article def going to try it! Subscribed!
     
  6. SantaMonica

    SantaMonica Fire Shrimp

    Joined:
    Jun 15, 2008
    Messages:
    305
    Location:
    Santa Monica, CA, USA
    Glad you like the info.

    Eggcrate won't work... needs to be a very roughed up think plastic material like plastic canvas or knitting screen. Needs high air bubble flow, and strong light right next to it.
     
  7. ingtar_shinowa

    ingtar_shinowa Giant Squid

    Joined:
    Jun 13, 2009
    Messages:
    7,072
    Location:
    Billings Montana
    these seem to be all the rage right now
     
  8. Click Here!

  9. Reef4life

    Reef4life Feather Duster

    Joined:
    Jun 6, 2011
    Messages:
    226
    what type of bulb should you use? what is the ratio of bulb to screen size?
     
  10. SantaMonica

    SantaMonica Fire Shrimp

    Joined:
    Jun 15, 2008
    Messages:
    305
    Location:
    Santa Monica, CA, USA
    Scrubbers are now sized according to feeding. Nutrients "in" (feeding) must equal nutrients "out" (scrubber growth), no matter how many gallons you have. So...

    An example screen size is 3 X 4 inches = 12 square inches of screen (7.5 X 10 cm = 75 sq cm) with a total of 12 real watts (not equivalent) of fluorescent light for 18 hours a day. If all 12 watts are on one side, it is a 1-sided screen. If 6 watts are on each side, it is a 2-sided screen, but the total is still 12 watts for 18 hours a day. This screen size and wattage should be able to handle the following amounts of daily feeding:

    1 frozen cube per day (2-sided screen), or
    1/2 frozen cube per day (1-sided screen), or
    10 pinches of flake food per day (2-sided screen), or
    5 pinches of flake food per day (1-sided screen), or
    10 square inches (60 sq cm) of nori per day (2-sided screen), or
    5 square inches (30 sq cm) of nori per day (1-sided screen), or
    0.1 dry ounce (2.8 grams) of pellet food per day (2-sided screen), or
    0.05 dry ounce (1.4 grams) of pellet food per day (1-sided screen)

    Very rough screen made of roughed-up-like-a-cactus plastic canvas.

    Clean algae off of screen every 7 to 14 days, so that you can see the white screen material.
     
  11. Matt Rogers

    Matt Rogers Kingfish Staff Member

    Joined:
    Dec 31, 2000
    Messages:
    13,466
    Location:
    Berkeley, CA
    I love this direction. Much easier to implement in existing sumps that box filters.
    That was a great read.
    Have you done any pH tests with UAS use/non-use to see any improvements?
    I recently starting using air with my chaeto to increase flow and noticed an improvement with a recent pH test. But I need to do more to say concretely. Curious if you have noticed any trends there...

    matt
     
  12. SantaMonica

    SantaMonica Fire Shrimp

    Joined:
    Jun 15, 2008
    Messages:
    305
    Location:
    Santa Monica, CA, USA
    Waterfall scrubbers generally raise pH by 0.1 or 0.2. Upflows should be the same if the amount of growth and photosynthesis is the same.