Ro Di TDS

Discussion in 'SpectraPure' started by m204, Dec 1, 2011.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. m204

    m204 Plankton

    Joined:
    Dec 1, 2011
    Messages:
    0
    Hi, I,ve just set up my new spectrapure ro/di.
    I'm still doing the Rinse up. the issue i get is that the TD on the right side dose not drop down to 0, the unit has been running now for the best part of 6 hours. is that normal? my pressure is at 72psi water temp is around 13°c
    any help will be appreciated
    many thanks
    Marco
     
    m204, Dec 1, 2011
    m204, Dec 1, 2011
    #1

    2. Click Here!

  2. reefwerks

    reefwerks Flamingo Tongue

    Joined:
    Sep 18, 2011
    Messages:
    109
    Location:
    Sun Prairie, Wisconsin
    which model?
     
    reefwerks, Dec 1, 2011
    reefwerks, Dec 1, 2011
    #2
  3. m204

    m204 Plankton

    Joined:
    Dec 1, 2011
    Messages:
    0
    Its a Maxcap RO/DI 180gl
     
    m204, Dec 1, 2011
    m204, Dec 1, 2011
    #3
  4. SpectraPure

    SpectraPure 3reef Sponsor

    Joined:
    Sep 10, 2009
    Messages:
    25
    What are the TDS readings of all four probes?

    Left IN
    Left OUT
    Right IN
    Right OUT

    Scott
    SpectraPure, Inc.
     
    SpectraPure, Dec 2, 2011
    SpectraPure, Dec 2, 2011
    #4
  5. m204

    m204 Plankton

    Joined:
    Dec 1, 2011
    Messages:
    0
    in 01
    out 214
    in 01
    out 00 I've now installed the SilicaBuster
     
    m204, Dec 2, 2011
    m204, Dec 2, 2011
    #5
  6. SpectraPure

    SpectraPure 3reef Sponsor

    Joined:
    Sep 10, 2009
    Messages:
    25
    I hope you have reversed the first two readings for me.

    The meters may be off by 001, consider it 000.

    Scott
    SpectraPure, Inc.
     
    SpectraPure, Dec 2, 2011
    SpectraPure, Dec 2, 2011
    #6

    7. Click Here!

  7. m204

    m204 Plankton

    Joined:
    Dec 1, 2011
    Messages:
    0
    HI Scott thanks for your help!
    i just checked and both in and out on the right side read 000

    As for the left side the reading are as i wrote them.
    i'll swap the probes so they will make more sense.

    Cheers Marco
     
    m204, Dec 2, 2011
    m204, Dec 2, 2011
    #7