Got my new light!!!!

I finally was able to get the AI Prime light!!!

Anyone have any configuration settings they can pass along. Tank is still cycling

Thanks!!

 

Well congrats.

I need to look at the specifics of the Prime. I run white at about 50% typically you can do blue% twice that of white and get a nice affect.

Let me look around for specifics, I have the Hydra 52 with the controller.

 

Thanks! I can control the light right from my phone or computer! As son as I turned it on the coral that is on the tank opened up!

 

Well do not run it at 100% if you have corals, start at 40-50 for now.

 

Looking good

 

I run mine at 44% now. I started quite high at 70% but was burning acro tips near the top of my tank and my scoly at the bottom started bleaching.

This is what my setup looks like.

White is the only color I turn down. Everything else sort of peeks up towards the 90%+
Each line on the graph represents color of LED. Have fun with it and play with the combinations till you find the color temp you like the best.

 

This what I set mine to for the moment. Everything but white is at 30% and white is at 60% u till 9PM

 

I would bring the white down some. Down to 50% at least. How about the other colors? I see only white n red.

 

The other colors are all at 30%. I have it set from 12pm with a 2 hour ramp to 2pm. All the colors then are at 30% except the white at 60% to 8pm with a 2 hour ramp to 10pm. Luner set from 12am - 2am. What do you tihnk?

 

Coral today with the light

Does anyone know what this is?

Thanks!