Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
To be honest data sheets are rather confusing, especially when the add multiple items. A tip when daisy-chaining strings would be to use fast...
You're reading output of the drivers. (The amperage you'd be running the LED's) Look at input... States it draws 1.2A@115v
Aw-man them wife's always ruin the fun, not even giving you a chance to dream about it. Nope... Your dreams are crushed even before that thought...
For such a well thought out design they definitely skipped on that one... I agree I hope they come out with a bracket of some sort; can't see that...
I did underline the word class....Not sure how you can compare Luxeon M's to Cree XT-E LED's when one is a 12v-11w compared to a 3.5v-5w... Needless...
Wowwzers, that's one of the best designs/LED layout I've seen to date... And the carbon fiber case is just icing on the cake. Those XT-E LED's are...
You're correct these drivers don't fully dim, in the data sheet it explains it. PWM goes down 15%, Analog down to 5% (oops 5% not 10% i originally...
Here's me toying around with an old MH Coralife fixture I picked up for 40 bucks <--- working I might add, just cosmetic damage which is an easy fix....
Good stuff!! I built this with a lot of patience but one thing I do regret is not drilling through holes for the short wires but I lack a drill press...
I can't say that it'll be any cheaper, I'm into this fixture for about 1400-1500 at the moment and it's still not finished, but that's because I'm...
Personally I'd go for option 2 as this would give you a even spread of light. Option 1 is and would be prone to spotlighting which personally I hate...
:thumb_up:
Well I made my LED build thread, still working hard on the renovation to get the tank setup but here's the thread for the led setup...
Another thing to consider is using two smaller pumps to give you the turnover rate your looking for. By doing this, you can have one pump hooked up...
Well small update, I made the cables that will connect the fixture to the control box. There are not really necessary but I figured it would be a...
After sleeping on how the LEDs were shorting out everywhere I decided to re-think how I soldered the wire to the LEDs. So you guessed it I...
So I have good and bad news, bad news: I had probably 20+ shorts from the wire resting against the LED star itself which cause all sorts of problems....
Yup this is basically complete now but I'm retrofitting a 72" MH Coralife fixture so I can use the CMF sockets for actinic bulbs ;D this was...
Well today turned out pretty good, managed to get the other two heatsinks drilled and tapped and the LEDs mounted ;D Plus even managed to tin the...
Well who was I kidding I ran into that store faster than you could say DIY ;) I must admit I was shaking at first not wanting to slip with the...
Separate names with a comma.