Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
So, 5 months of constant use. The flow valve is at a constant stream now, barely a drip at all visible. No more air being trapped in the denitrator....
I have a AWI extreme 3. Yesterday I went to get some water out of it to mix up some buffer and it was just dripping. I found out that the waste...
Todays results Drip No2 - 0 No3 - 0 Dripping at 1 drip every 2 seconds. I am now going to increase drip to 1 drip per second and check the results...
Ya I jumped the gun and opened it up to 2 drips per second and this morning the test showed an increase of No2 and No3. So I turned it back down to 1...
Today's results were a shock. They speak for them selves. Here is Medium and Low range from the drip for both No3 and No2. [IMG] [IMG] [IMG] [IMG]
From what I know, the Aquapure and the biodenitrator work completely differently from each other. The difference is, the aquapure must be maintained...
Tested this morning from the drip. The reactor water inside the chamber had quite a bit of cloudiness to it this morning where before it was clear....
Todays result on Nitrite from the drip It seems like it is definitely lower each test. [IMG]
So far there has not been much air buildup in the reactor chamber. I keep an eye on it though. Nitrites dropped a good bit from my last test, so I...
This is the test results from today at 4:30 pm from the drip only I decided to just follow the drip until it is at zero, then I will test the tank...
This is from yesterday 8-26-12 at 11:00 am First photo is from the drip [IMG] This next photo is from the tank [IMG] First time using salifert test...
Todays test results with the API test kit (DAY 4 of operation) Left to right PH from tank/Nitrate from denitrator drip/Nitrate from tank/Nitrite from...
Thank you so much. I felt like I was losing my mind this morning, second guessing the setup I already had correct to begin with.
OK thanks. Ill describe how I have it so maybe that will help with out the video. Water from main tank goes to the short pipe inside the reactor...
So does this look correct then? If it is correct then I just spent 2 hours trying different combinations for nothing because this is exactly how I...
oops I think I may have assembled the unit backwards. Does any one have better assembly instructions? Marinedepot is not able to provide a better...
30ppm yesterday. But I am going to skew the results by switching to a different brand of test kit. I currently use API, and I have ordered salifert....
Installed at 7:30 pm 8-22-12 Ran full open till 10:pm reduced to 2 drips per second Test result 11:00 am 8-23-12 Left side collected from drip,...
Edited to add a video. I couldn't wait to try it out. I don't think the weld-on is cured yet but I wanted to see it working.
I have a milling machine so I used an end mill bit. Im just waiting til tomorrow to put it in the aquarium, but I already tested it and it is water...
Separate names with a comma.