21x11.5x17.5 and leds

I currently have a Raplid Par38 I was thinking of getting another or should I get a DIY setup. I will be stocking SPS

 

you'll need at least 1 more if not 2, I'd just email mike at rapidled to be safe.

 

do you have his e-mail?

 

So I e-mailed Mike from Rapid led and He advised me to buy a 12diy kit so I Ordered the Dimmable soderless 6 cool white and 6 royal blue 80 optics and a 4.25x16 heatsink.

My question is how should I drill and tap the headsink and arrange my led's?

http://www.rapidled.com/12-led-plug-n-play...t-kit-dimmable/

Also they were out of dimmers and good Diy for that ?

 

Save yourself the time and effort and buy the thermal sticky pads from Rapid. They are simple to use and work very well.

 

I got the paste =/ its ok cannot be much harder then a cpu

 

Yea but you need to drill and tap right?

 

yeah no biggie I have this at work , I just need to figure out how to set it up and arrange the led's

 

Do you mean the thermal adhesive? or the grease?

Email back and make sure you get the thermal adhesive, then you don't need to drill.

Also, see if you can add like 4 plug and play led extension wires

http://www.rapidled.com/led-extension-wire-3-5/

I guess radioshack sells all the stuff for a potentiometer, or you can order the boostled typhoon controller for $54 and have sunrise sunset etc.

Also, i'd order their volt meter as well, cheaper than the one at HD.

good luck and enjoy

 

got my box today gonna set it up tonight hopefully how should I go about my spacing and mounting ?