Ph wont raise past 8.0

Discussion in 'New To The Hobby' started by sjk2840, Mar 29, 2008.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. sjk2840

    sjk2840 Plankton

    Joined:
    Mar 29, 2008
    Messages:
    4
    Location:
    Arizona
    Hi all, looking for some advice -just started a 10 gallon saltwater tank, which is now on week 2 of the cycle- I have well water where I live and cant get my ph to raise above 8.0- I've added the sealab block and ph buffer, I'm adding buffer on a daily basis. I had a salt tank 8 years ago and had city water and never had a ph problem- it was a perect 8.3. I know fish can tolerate 8.0-8.3 ph, should I just leave it at 8.0? thanks:-/
     
  2. Click Here!

  3. missionsix

    missionsix Super Moderator Staff Member

    Joined:
    Sep 25, 2007
    Messages:
    5,734
    Location:
    Bend,Oregon - USA
    Your well water is going to devistate you tank. It contains all kinds of bad things. I live on a well also. While the water is the best to drink around it's really bad for your tank. With a tank as small as you have you should be using bottled water (distilled). If you think you are having trouble now you'll be very dis-appointed in the future. As for the Ph I couldn't tell you, but, maybe your test kit. Try using another test kit.
     
  4. lunatik_69

    lunatik_69 Giant Squid

    Joined:
    Jul 10, 2007
    Messages:
    7,933
    Location:
    Miami, FL
    You shouldnt be adding anything or checking for anything at this point. Your still cycling. Ph comes into play later in the game, but not now. Words of advice; No lights, no additives, no water changes, if you have to use well water, it should pass through a RO/DI unit first.
     
    2 people like this.
  5. sssnake

    sssnake Montipora Digitata

    Joined:
    Dec 30, 2005
    Messages:
    1,062
    Location:
    Montreal, Canada
    :thumb_up: ... +1 on that.
     
  6. Tangster

    Tangster 3reef Sponsor

    Joined:
    Aug 16, 2006
    Messages:
    5,644
    Location:
    Va/Ct
    First off what time of day are you testing the P.h ? ALSO IF YOU ARE USING A LIQUID Regent COLOR kit its close at best a Calibrated P.H monitor is the only way to tell for sure then again time of day effects the P.H if its at 8 in the early A.M thats great hell mine runs at 7.7 to 7.8 just before lights come on. And after a hr or two of the Photo-period the P.H will rise ..
    Also I never really care about the P.H if you are cycling this tank get a Test Kit for the Alk or Carbonate or DKH all mean the same thing just different method to test for them. Also the surface of the water may not be moving enough to allow for good gas exchange of the CO'2's that build up over night with oxygen. If you have a tight fitting glass top or hood remove the glass tops and or open the hood and add a fan.. I run a fan all night long to help pull in oxygen and exhaust CO2's .. But the bottom line is P.H in and of its self means little just worry about the proper Carbonate levels .. Thats all P.H really tells you is if there is any carbonates left to off set the systems acids like Tum's for the tank :)

    And also I would tell anyone to use this cycling time to learn about the Carbonates and Calcium and Magnesium levels and how they all interact with each other and to get their tanks parameter up and steady and lean how to keep them like that.. better to learn now with a cycling fish or something in there rather then to try and learn once the more expensive animals are in there. But change no water ..

    And never ever use well water unless its from a very deep 8 in. they are around 300 ft deep cased drilled well and its been tetsed for metals and other toxins if its a shallow bored well 75ft or so deep then I'd never even think about using it .
     
    Last edited: Mar 29, 2008
    1 person likes this.