Overflow Failure

Discussion in 'General Reef Topics' started by Ryland, Sep 20, 2011.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

Page 3 of 3
  1. Ryland

    Ryland Stylophora

    Joined:
    Sep 15, 2010
    Messages:
    962
    Location:
    Southeast Iowa
    Okay. I understand this is the inevitable. At this point I am inclined to try the epoxy. I say this because I have no desire to tear down my tank, dry it, seal with silicone, let it sit for 48 hours, and then refill and cross my fingers. Seems like too much work for something that IS going to fail again. Seems like there has to be something that would work better. What about some of the adhesives loctite carries? For example
    Loctite Plumber and Marine Clear Adhesive from Loctite Adhesives
     
    Ryland, Sep 21, 2011
    Ryland, Sep 21, 2011
    #21

    2. Click Here!

  2. Ryland

    Ryland Stylophora

    Joined:
    Sep 15, 2010
    Messages:
    962
    Location:
    Southeast Iowa
    Ryland, Sep 21, 2011
    Ryland, Sep 21, 2011
    #22
  3. Ryland

    Ryland Stylophora

    Joined:
    Sep 15, 2010
    Messages:
    962
    Location:
    Southeast Iowa
    Ryland, Sep 21, 2011
    Ryland, Sep 21, 2011
    #23
  4. Ryland

    Ryland Stylophora

    Joined:
    Sep 15, 2010
    Messages:
    962
    Location:
    Southeast Iowa
    Anybody know anything about the above mentioned stuff?
     
    Ryland, Sep 21, 2011
    Ryland, Sep 21, 2011
    #24
Page 3 of 3