My new 60x30x30 tank

12 hours of ro production and this is all i have got, guessing around 2-3 days and this is just to flush it all through






2 days of ro production i need a faster unit lol

 

Power board just need another 2 double sockets above them for the heating and cooling did have 2 spare fronts and backs but put them in a safe place lost forever



For anyone with a pumped ro unit and is worried about how long you can leave them on for had mine on for the last 5 days for 15 hours a day, I kept checking the pump and psu they remained cool to touch this could be because the time of year and its all attached to the metal frame of the ro unit.

Got the tank filled water sits around 10mm under the brace bars and drops down around 50mm when the pumps off. The sump ( cheers Alf) is plenty big enough and could take around another 75 ltrs.

Tested the ppm in the tank after flushing it all through and its only at 002ppm so ive drained around 1/2 the water from the tank and now adding the salty goodness ( cheers macca ).

Looking forward to get it all set up, Just have the temp controller to wire up now and a halide stand to buy.


Heater controller finally came the two double sockets on the top are ran of the controller, The two to the left are cooling and two to the right are heating

 

Cool had a good day thanks to Eric started cycling water between tanks to stabilize the params then Eric knocked on the door lol

The tea towel is so he cant be recognised on crime watch







Good old Eric hes a true gent

 

Just got the tank to top up now and the sump to fill, Cabinet still to clad with black gloss and a shelf to be made in the dry socket area, Oh not forgetting to but the halide hanging kit



Sorry for the mes of the sump still got to fit the ozone unit and controller in the dry side also fit the heater controller somewhere


Tank decorated by the other half not to sure how to get around the corners with the magnet yet lol

 

that is one nice set up!!

 

Bought my self a home made reactor for £150 cost the bloke £150 in materials to use i call it the nano reactor lol

 

Had a few cyano issues but used the red slime remover and 2 months on no signs

Always want to be in bless them lol

 

Few close shots for you