Manual for Red Sea Berlin

Discussion in 'Protein Skimmers' started by BloodyShirt, Nov 3, 2008.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. BloodyShirt

    BloodyShirt Fire Worm

    Joined:
    Oct 5, 2008
    Messages:
    152
    Location:
    New Jersey
    Hoping for a pdf or something legible.. couldn't find anything on teh googles :/

    just want to read about it.. have it setup and running.. just not too sure what i should be doing with all these white bubbles :D
     
  2. Click Here!

  3. lunatik_69

    lunatik_69 Giant Squid

    Joined:
    Jul 10, 2007
    Messages:
    7,933
    Location:
    Miami, FL
    The micro-bubbles(MB) can usually be control by a air valve. If I remember correctly, you need to open the valve to stop the MB. If the skimmer doesnt have a air V, then try placing a sponge on the outlet of the skimmer. Luna
     
    1 person likes this.
  4. lunatik_69

    lunatik_69 Giant Squid

    Joined:
    Jul 10, 2007
    Messages:
    7,933
    Location:
    Miami, FL
    Have you try contacting the company? Most companies will e-mail the manuals. Luna
     
  5. BloodyShirt

    BloodyShirt Fire Worm

    Joined:
    Oct 5, 2008
    Messages:
    152
    Location:
    New Jersey
    Thx Luna.. its actually in the view cup.. not sure how I should be adjusting it basically.. its throwing a huge amount of bubbles into the view cup and overflowing out the drain hose.. the micro air adjustment valve.. (screw tightening onto hose) isn't changing much that I see.. I know it requires some break in or calibration.. just not sure what i should be letting it go as
     
  6. Matt Rogers

    Matt Rogers Kingfish

    Joined:
    Dec 31, 2000
    Messages:
    13,466
    Location:
    Berkeley, CA
    Is there a valve on the water output? Make the water come out faster until the skimmer is broken in.

    Red Sea has a sponsor board here, you might want to post there about the manual.