Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
Here we go, fresh water run for a couple of days. [IMG]
The skimmer I chose to run my 300 is the RLSS DB10i. After installing this skimmer to three of my very finicky customers I knew that I needed one of...
Awesome as well.
Awesome!
The sump needs to be filled as well :)
I’m a firm believer that less is more. The returns on this system are as simple and as minimal as possible. This system will operate with two RLSS...
Fill, leak test, salt to proper salinity, aquascape and then add sand.
Nearly 24 hours of water making. [IMG]
RO system – I had an RO system that was more than 10 years old. So, I felt that it was time for a change and ordered a new system from SpectraPure...
Time to start plumbing! But, before we can get started we had to cut opening in the stand for the drains from the overflow boxes. Thanks to the...
Yes, the drip plate sits in a horizontal position.
Yes, to your first question. Your second question; the front and the back corners of the tank are sitting on an inch and a half of wood, which is...
165-Gallon Sump The sump that will be used on this system was designed to be used with the 500-gallon system but will be a great fit for the 300. I...
Waiting as long as I did to find the perfect tank that would meet my needs as well as the families came with an added bonus. Technology has changed...
The door panels on this stand will not use hinges. I have found through the years that doors attached to a stand with hinges always get in the way....
The 90-gallon system had to be moved – slightly – but only just a little bit and look what we found. The sump fan blowing saltwater air from the...
The floor panel was painted on both sides and is now installed giving the stand a nice clean look. [IMG]
The floor panel that would be fitted to the inside of the stand and the back of the door panels were painted with white moisture proof oil-base...
I can tell you I was nervous. :o
I learned from a very old man a long time ago, use the best most expensive brush you can find and go with the grain. Also, four or more coats and...
Separate names with a comma.