Join 3reef now to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.
Except my baffles are 10" high. So I've got a nice amount of room available for back flow when pumps are off. But I'm sure you'd be fine with your...
I have the exact same sump size and set up. I used acrylic baffles and was very liberal with the silicone to make sure they stayed in place....
Once I replace the mag 7 with a Sicce pump I think the noise problem will be all gone.
Thanks! So there was too much noise from the overflow so I tried out two new things. First I raised the height of the overflow by about an inch...
Do you think Sicce 2.0 for my size tank? I was just looking at those too vs the Eheim 1260. Eheim being 2x more expensive though...
Well Deep Blue did respond and echoed what Monroe said - to remove the gasket on the dry side. I did that and no leak, so all is good there. The...
Check this out for the frag shelf... http://www.aqua-mags.com/ I emailed deep blue professional to see if they'd replace the bulkhead (and overflow...
Quick question: I'm noticing a very small drop of water coming from bulkhead. Should I tighten more? Or is there something else I should do? I...
Ok I decided to just go with a small power head in the sump to feed the refugium. The overflow seems to be water tight. [IMG]
Ok, so put everything together, but didn't glue yet. So before a test run I'll have glue and have fasteners on the tubing. From the pics below does...
Ahh PVC unions... I'll have to check that out, I'm not into plumbing so I know nothing about the parts. Thanks.
I agree. Next thing to do is get the plumbing put together to test everything. Quick question: what advice do you have for the plumbing? In the...
I know I'm ready to fill it up... I'll be moving in a couple months so I'm hesitant to set it up just to have to tear it down and move it
[IMG] I think this will be the final rock scape. Sand will go in and cover up the PVC
Making some progress on the stand. First time building anything so I'm finding I'm redoing a lot of stuff. Side doors are rigged to be removable....
Another little project I'm working on. I like the idea of being able to move some frags around on the overflow wall if I wanted. [IMG] [IMG]
You know I've never had any reactors in the nano I've kept, and really haven't done much research on them. I'm guessing with water changes, and...
Perfect, thanks!
How do you best control all the electronics that go underneath your stand? This isn't meant to be an aquarium controller question. I see in pics...
[ATTACH] Thanks, this sump will be a snug fit, won't leave much room for other stuff
Separate names with a comma.