[nwfd1725]

Got more supplies in including MP10 and RO/Di

My first question is what settings do most of you guy/girls use on the mp10. Also when I get a second one is it better to sync or anti sync them, and what setting.

Also I flushed my BRS RO/DI it is the Plus model 75gpd, but the pressure stayed around 48psi and i was wondering if that is ok? It read 3 TDS In and 0 TDS Out after I flushed it for around 2 hours. I will cut the extra line they give down to size and see if that helps the pressure.

[exactlyobp]

Hey Ryan conratz on coming back! I always wanted a rimless, great choice!

Originally Posted by nwfd1725

Got more supplies in including MP10 and RO/Di

My first question is what settings do most of you guy/girls use on the mp10. Also when I get a second one is it better to sync or anti sync them, and what setting.

Nice! I had one MP on my 90 for a while and came across another one later on and I love having two! I was very surprised when I have asked the same question about the VorTech owners settings on this thread, turned out, ReefCreastMode is the most popular one! And I love it as well I still use the Short Pulse Mode to lift up some crap off the sand bed once or twice a day, but the RCM is the main setting right now.

Also I flushed my BRS RO/DI it is the Plus model 75gpd, but the pressure stayed around 48psi and i was wondering if that is ok? It read 3 TDS In and 0 TDS Out after I flushed it for around 2 hours. I will cut the extra line they give down to size and see if that helps the pressure.

Its completely normal and 48psi is actually pretty good pressure, and there is really nothing you can do about it, unless you wanna boost the pressure to make way more RODI with an add-on booster pump.

Post a pic or two when you receive the tank!

[nwfd1725]

Thanks man I will do I will pick it up first thing tom morning and will take pics as it comes together throughout the day tom. Stay tuned lol

Also do you use sync or anti sync with your pumps thanks for the help

[exactlyobp]

When the two (or more) MPs are on the same wall, the setting should be Synced, but for most people including myself, tend to place the one pump on one side and another one on the other, and set Anti-Synced. The anti-sync setting means master pump's at 80% of the flow, the slave's at 20% with the RCM

[nwfd1725]

Thats what i was reading thanks man

[exactlyobp]

Isnt it exciting already to even think about what you would/could do with VorTechs??

(Here is my Youtube vid during the water change the other day..)

[nwfd1725]

it is my mind runs all day thinking of things i can do with the lights and pumps and setting it up tom will be a long day but a good one.

[nwfd1725]

Going to get the tank now hopefully water by end of the night stay tuned.



Heres is some pictures of the order that came in and water is being made.

[nwfd1725]

Heres the tank setup starting plumbing now

[nwfd1725]

Tank