refugiums - Page 4

Craig Manoukian · 09-03-2004, 05:21 AM

In my setup there is no difference in the water levels. *I control the flow by having the water move over equally sized baffles in the refugium and the top of the water has the current. *I drilled smalol holes in the refugium baffles for some cross current.

Midnight_Madman · 09-08-2004, 06:14 AM

My fuge is finaly done. Now I am tryng tying to figure out what is the best substrate. Petco sells live Aragonite sand for about 24.00 for a 10LB bag. *Im not sure if I need live sand or not.. The tanks a year old. My fuge area is only about 10"x10" What else should I do to get it started?

Midnight_Madman · 09-14-2004, 07:15 AM

Here are some pictures. I completly rebuilt a new door. I didnt want to ruin the original just incase.

Craig Manoukian · 09-14-2004, 03:56 PM

Very nice, especially the last shot!

Midnight_Madman · 09-14-2004, 04:15 PM

Thanks... I used the drip plate turned sideways for my first partition, and the next is reversed with the opening on the bottom about 2" with a sponge- the water has no place else to travel except through there..