My Reef Creations Skimmer Mods-Protein Skimmers-3reef Forums

ardo_ski · 09-24-2007, 06:07 PM

Can anyone tell me or point me to a link on the u-tube mod for a MRC skimmer. Also any other mods for them would be great.

Thanks,
Ardo

ardo_ski · 09-26-2007, 01:36 PM

Anyone??

Matt Rogers · 09-26-2007, 02:04 PM

Is this it?
Michigan Reefers - View Single Post - My new skimmer

ardo_ski · 09-26-2007, 04:31 PM

Yes it is and I do not know how miss that on MR board since I'm on there everyday. Just sent Raptor a message.

Thanks,
Chris

Matt Rogers · 09-26-2007, 05:02 PM

Cool. No problem. Do you know much about this mod? I am curious how it works..

ardo_ski · 09-26-2007, 05:53 PM

What think all it does is direct the water up the tube. Seems simple but I figure I would try and find some who has done it first. Hate to try and reinvent the wheel for no reason..

. Thanks again for the link!!

Ardo

ardo_ski · 09-28-2007, 08:42 PM

Well I never found a good picture of it, but did figure it out. All you need is about 1" of 1" PVC, 1.5" Street Elbow, 1.5" 90, and 1.5" to 1" reducer. Than connect the two elbows together for a U shape, insert the reducer and 1" PVC. Last step is to connect to the bulkhead that hold the Beckett and position it pointing up the skimmer body. Seemed to make the water not as turbulent. Since I haven’t hook my main display to the sump I will not know if it increased the performance of the skimmer. The next time I clean it I will take some photos.

Ardo

Matt Rogers · 09-28-2007, 11:05 PM

Not as turbulent? I think you'd want more. Is it more flow or something?

ardo_ski · 10-10-2007, 07:55 PM

Well I found a better link to the mod. Now it's time to see how well it works since I used inch reducer and didn't have it stick out as far.

Upgrades

Reef Central Online Community - MRC Club

ardo_ski · 04-07-2008, 07:51 PM

Well after getting a newer Beckett for my MR-2 skimmer I was getting it dialed in and seems to work better then their old style. So I deiced to remove that mod call the u-tube mod. Well I'm glad I did. It seem to create to much upward current and kept tossing the foam back under. Now the bubbles seem finer and denser than ever before.