CPR Bak Pak 2

Joe_Mama · 07-24-2003, 07:42 AM

Any comments about this product?

Craig Manoukian · 07-24-2003, 10:53 AM

These are widely used skimmers and come highly recommended. I have one that has given me nothing but fits even after replacing the pump. The most limiting factor in the performance of any skimmer, outside of design, is the pump used to operate the skimmer. The pump heavily determines the amount and quality of the bubbles. Skimmer/pump setups that employ a needle valve are generally better than the straight venturi type skimmers.

I know lots of folks that have had better luck than me, maybe I got a lemon. HTH

Craig Manoukian · 07-24-2003, 10:54 AM

PS:

Welcome Joe_Mama!

Joe_Mama · 07-24-2003, 06:20 PM

Thanks for the info craig!

Gresham · 07-25-2003, 10:47 AM

I love them, recommend them, and have sold many of them. Only 2 complaints:
1: get rid of the rio, add maxi-jet 1200 w/ venturi
2: get an extra o-ring, you don't want to be caught with your pants down (collection cup falls into skimmer when o-ring breaks)

They, like ALL venturi skimmers, need to have the venturi cleaned. That means ALL lines, connections and valves, need to be cleaned (bi-weekly I suggest). I use warm water & vineager and a toothpick to get inside the fittings/line.

DrRichP · 11-10-2003, 06:37 PM

The CPR Bak-Pak smokes if you're looking for a HOB skimmer. *However it can not be adapted for in sump operation like the SeaClone can. *I have had my CPR Bak-Pak for a year and never a problem. *The Rio 600... a subject of much debate. *Mine has been great. *If you don't think it does enough for you, you can replace it with the Rio 800 w/venturi. *The 800 is the exact same size etc., just a higher flow rating. *If you just plain hate Rio pumps, the Maxi-Jet 1200 is for you.

Matt Rogers · 11-10-2003, 08:13 PM

I've never had major problems with Rios either, but my Maxi Jet 1200 is a lot quieter.

[flash=468,60]http://www.3reef.com/fish/sitepics/threesteps3.swf[/flash]

Craig Manoukian · 11-10-2003, 09:31 PM

Will try the Maxi-Jet 1200, thanks for the feedback!

Malachi · 11-26-2003, 06:57 AM

I have one and it has been in use for over 2 years, it has stopped bubbling twice, which took me 15 minutes to rip it a part, clean it, and get it back running. So really no complaints here. I removed the bio balls after my cycle and now use the chamber to put all my chemicals in so it mixes before entering the tank which is a very nice feature. Can even pour extra water in it to replace evaporation.