Pumping just a teeeeny tiny too fast

[tsouth]

How's it goin everyone. Well I just need a littttle advice on whether or not I should put a T and valve back onto my water return line. I have a CA 1800 pump going at 635 gph to return the water from my wet dry to my tank. I have live rock rubble as media in my wet/dry and know that it should be submersed in water at all times, right? Well anyways it looks like I'm pumping just a litttttttttle too fast. The wet dry water level goes down about 1 millimeter every 2 hours or so. Should I go ahead and stick a tee & valve back on and just open a little

[clownfish]

Check this link Melevsreef.com | Acrylic Sumps & Refugiums ..I know nothing about this sort of stuff, but the guy on the link explains a lot about everything....I think I did give you that link already on another post lol...never mind...good luck anyway.

[tsouth]

Heyy yeah you did and I found the answer which is yes! lol Thanks quick draw McGraw! Woo karma for you!

[Otty]

I ran a Mag18 on a 55g once and I put a T with a just after the pump and would use a valve to return some of the water to the sump instead of blasting the tank with water.

[Otty]

This is how I done it so that I could run my sump seperate from my display tank if I needed.