My 75g

[Iraf]

Ok I have a 75g sitting in storage with a 30g sump, issue is the sump has an integrated space for a fuge and I know alot say you want the fuge to be separated into a separate tank than the sump. So I'm trying to figure out the best way to set this up.

It's a 75g Don't know the exact specs but I know it's a 48" length tank with 2 overflows that are drilled on opposite corners in the back piece of glass. trying to figure out if I should run them 2 overflows into each other then split them off between the sump and fuge or have them both dump into the sump then pump up to the fuge, or what...

Thinking about ditching the 30g sump I have and buying a 20g for a sump and a 5-10g for a fuge and running 2 return pumps, one from each tank.



The other idea was move the PH delivering water to the skimmer chamber of the sump to try and get some of the water pre-skimming

Sorry I'm not the best artist esspecially with using mspaint :p

[luvreefs23]

I would just throw a another t off one of the drains and feed it to the refugium directly and control with a ball valve and elminate the pump from the sump to the fuge