Poweheads.

New2Reef · 03-02-2004, 01:46 PM

I'm running a Aquaclear 802 on my 55g....is this enough or should I be running 2 smaller pumps. What do you all think of the rotating heads? I'm trying to create a happy home for everyone.
TY
N2R

Phil5613 · 03-02-2004, 06:44 PM

Whatever powerheads you use have you protected the intakes to keep the anemone from being sucked in and ground up?

Scuba · 03-03-2004, 12:39 AM

I have 2 powersweeps 214 befind the LR, and a 402 in the top right hand corner for overall water movement, along with the Seaclone 100 and filter.

New2Reef · 03-03-2004, 01:42 AM

I have protective covers over the intakes...I learned the hard way and lost a lil blue damsel that way....felt bad fer the lil guy.

I'm thinking of adding a small sweeper behind the LR but I also want places for the fish to go and get out of the current for rest times.......
N2R

New2Reef · 03-07-2004, 11:13 AM

I'm considering a higher quality powerhead with a little more volume,what types of ph's do you guys run or recommed for a 55g?
Thanks
N2R

tdevil · 03-07-2004, 12:14 PM

well, i really dont use powerheads, i use a magdrive, which is more of a pump then a pwr head, i really like them
in a 55g i would use a mag 5 (500gph)
you really dont need a resting spot so-to-speak, the fish will be fine, they are use to more than we can give them, and some fish need more flow
i do have 2 powersweeps, but they need to be cleaned a lot to keep them working properly, i wish i would have never bought them, but i did, so i deal with it

HTH

td

hottielover14 · 03-07-2004, 04:50 PM

can't u get like covers for the powerhead intake. I have lost a snail to one so I took it out. What do u cover yours with.

Scuba · 03-07-2004, 05:15 PM

Here is a link to one type.
http://shop.store.yahoo.com/worldpets/aqquicfilfor.html

Phil5613 · 03-07-2004, 07:23 PM

for in the tank powerheads I suggest either cap or rio they come set up with covers to keep most stuff out.

New2Reef · 03-09-2004, 02:43 AM

Hey TD,
Your Mag5,does it chop the whole top of the tank? Any position I put my AC 802 in it doesnt seem to be breaking the surface where a film builds up...I'd like to provide complete chop for the surface and have no dead spots.
Thanks
N2R