New HydroFILL ATO from Innovative Marine

Discussion in '3reef Radar' started by Matt Rogers, Jul 24, 2013.

to remove this notice and enjoy 3reef content with less ads. 3reef membership is free.

  1. Matt Rogers

    Matt Rogers Kingfish

    Joined:
    Dec 31, 2000
    Messages:
    13,466
    Location:
    Berkeley, CA
    Available August 1st, the new Innovative Marine HydroFILL ATO controller system has few unique features designed for long use in a marine environment. The first are sensors that contain no moving parts. The sensors also contain chemically-inert graphite electrodes that utilize your water's conductive properties to complete a low voltage circuit, causing a control relay to actuate. Secondly, the HydroFILL ATO air lift pump is self-priming with a built in check valve to prevent back siphoning. Although built to last, these nice features will run you $199 for the controller and $99 for the pump. Look for a hands-on 3reef test soon. More below.

    [​IMG]

    HydroFill – ATO Controller System

    Automate freshwater replenishment, and say farewell to heavy lifting, unstable water parameters, and the need to frequently watch your water line.

    Topping off evaporated water for our aquariums is a tedious but essential task that every hobbyist encounters to maintain stable specific gravity & salinity levels.

    The HydroFill ATO Controller System takes advantage of your water's conductive properties to complete a low voltage circuit and cause a control relay to actuate and replenish water as it evaporates. This departure from outdated float sensors, offers the latest automation in electronic sensing for precise accuracy, repeatability, and no-moving part reliability.

    Customize your own "High and Low" set points to prevent constant On/Off cycling prone to single sensor design

    Sensors utilize rare earth neodymium magnets for stationary placement and simple out of the box installation. Small form factor makes it the ideal choice for nano to full size aquariums. Two chemically inert graphite electrodes are housed in each sensor for redundancy & consistent long-term performance in harsh marine environments.


    FEATURES:

    Controller:
    * 2 Year Warranty
    * Conductivity Method
    * For use in Fresh & Marine Applications
    * Controller Dims: 3.35” x 1.18” x 5.12”
    * Includes Double Sided Adhesive
    *1000W, 8Amp/120V Pump Capacity
    * Power Consumption: 1 Watt
    * Visual LED indicators
    a. Power -Red
    b. Level - Green
    c. Low Level – Green
    d. Water Filling – Pulsing Green

    Sensors:
    * Small Form Factor: 0.91” x 1.06” x 2.64”
    * (2) Sensor Design
    * Safe 5V Low Voltage
    * 6 foot sensor cables
    * (2) Rare Earth Neodymium Magnetic Sensor Holders
    * Chemically Inert Graphite Electrodes



    HydroFill – ATO Pump System

    Pair your auto top off with the industry's first low voltage air lift pump specifically designed for ATO controllers. The HydroFill ATO Pump System eliminates the guess work, and comes complete with a lift pump, acrylic bracket, return pipe, 10 feet of silicone tubing, 3 hose clamps, , and an optional hanging mount.

    Engineered for high performance, this external positive displacement diaphragm pump, outputs up to 15 gallons per hour and max 5 feet of head. This self-priming pump is equipped with a built-in check valve to safeguard against back siphoning.

    The HydroFill diaphragm pump is the smart alternative when compared to submersible pumps, diaphragm pumps offer the benefit of safely running dry and are thermally protected against heat build-up.

    Versatile design offers 3 options for pump placement: hang-on, cabinet mount, or simply place on noise dampening rubber feet.


    FEATURES:
    Pump:
    Positive Displacement
    Diaphragm Pump Method
    Self-Priming
    Built-in Check valve
    Dry Run Protection
    Thermally Protected
    Low Voltage
    ¼” Barb Fitting
    Up to 15 Gallons per Hour
    Pump mounting bracket

    Return Kit:
    10 feet of silicone tubing
    (3) ratchet clamps
    Acrylic mounting bracket
    Return pipe
    Inlet Hose Strainer









    More:
    Innovative Marine
     

    Attached Files:

    Last edited: Jul 24, 2013
  2. Click Here!

  3. Biocube

    Biocube Giant Squid

    Joined:
    Feb 17, 2011
    Messages:
    3,499
    Location:
    Northern, IL
    Wow! Looks nice! I do like how it doesn't activate the pump when there's sloshing in the sump.

    My MP10's cause irregular water levels when on NTM, this always messed up my old JBJ ATO causing higher than normal levels in my sump.
     
  4. dowtish

    dowtish Horrid Stonefish

    Joined:
    Jan 29, 2011
    Messages:
    2,062
    Location:
    Nashville TN
    Looks nice, but that price is too high IMO. The proven tunze osmolator tops out at $200, and that is where you should be competing on the price point.
     
  5. Biocube

    Biocube Giant Squid

    Joined:
    Feb 17, 2011
    Messages:
    3,499
    Location:
    Northern, IL
    Very true!
     
  6. ingtar_shinowa

    ingtar_shinowa Giant Squid

    Joined:
    Jun 13, 2009
    Messages:
    7,072
    Location:
    Billings Montana
    Different tech than the osmolator but I agree the price point may be limiting their customer base. Cool gadget though!
     
  7. pgoodsell

    pgoodsell Horrid Stonefish

    Joined:
    Apr 6, 2009
    Messages:
    2,059
    Location:
    Sparks, Nv
    The osmolator is tried and true, and cheaper. So why choose this? Will have to see how it does.
     
  8. Click Here!

  9. Biocube

    Biocube Giant Squid

    Joined:
    Feb 17, 2011
    Messages:
    3,499
    Location:
    Northern, IL
    Wait, you would need to pay $199 + $99?! You're better off getting a AquaController Apex Jr w/Display, Breakout Box and floats for the same price.