3reef Forums - View Single Post

Frizza · 01-15-2007, 12:28 PM

I made a mod to mine and it was really straightforward. If you look at the collection cup lid there is a small hole with a plastic cross within it, I removed this and attached some airline pipe to the nipple on the inlet pipe and the other end would go through the hole in the collection cup lid. If the cup ever gets too full and reaches the air pipe then the bubbles cut out. Nice and simple and stops any chance of it overflowing.

01-15-2007, 12:28 PM	#4 (permalink)
Frizza Coral Banded Shrimp Join Date: Jan 2006 Posts: 387 Karma: 186	I made a mod to mine and it was really straightforward. If you look at the collection cup lid there is a small hole with a plastic cross within it, I removed this and attached some airline pipe to the nipple on the inlet pipe and the other end would go through the hole in the collection cup lid. If the cup ever gets too full and reaches the air pipe then the bubbles cut out. Nice and simple and stops any chance of it overflowing. _________ 80gal with live rock (35kg/70lbs), 30gal sump, refugium with live rock, chaeto and DSB, Bullet-1 skimmer, Fluidized Reactor, T5 lighting (6 tubes), 4 x Koralia 3's.