3reef Forums - View Single Post - Tips on skimmer maintenance and performance

Michaelr5 · 09-20-2005, 02:53 PM

Skimmer: SeaClone 150
Pump: Included Maxijet 1200

Problem: Originally setup as a HOB, I had a lot of problems adjusting and never did seem to get a lot of production out of it.

Solution: Once I put it in a sump and got rid of the 'J' tube used for the HangOn mode. It became very easy to set and gets very good production.

Conclusion: Good skimmer in a sump when the water level does not fluctuate. If used as a HangOn, a stronger pump might work.

Cleaning: Routine emptying and cleaning of the cup. Mine gets half full every 3 to 4 days, that's when I clean it. Every month or so I pull it apart and clean the tower. (a 3/4" nap paint roller cover makes this job cake!) and check the air injection nozzle for salt/calcium buildup and clean as needed.

09-20-2005, 02:53 PM	#2 (permalink)
Michaelr5 Coral Banded Shrimp Join Date: Jan 2005 Location: Noblesville, IN,Indiana Age: 56 Posts: 373 Karma: 92	Re: Tips on skimmer maintenance and performance Skimmer: SeaClone 150 Pump: Included Maxijet 1200 Problem: Originally setup as a HOB, I had a lot of problems adjusting and never did seem to get a lot of production out of it. Solution: Once I put it in a sump and got rid of the 'J' tube used for the HangOn mode. It became very easy to set and gets very good production. Conclusion: Good skimmer in a sump when the water level does not fluctuate. If used as a HangOn, a stronger pump might work. Cleaning: Routine emptying and cleaning of the cup. Mine gets half full every 3 to 4 days, that's when I clean it. Every month or so I pull it apart and clean the tower. (a 3/4" nap paint roller cover makes this job cake!) and check the air injection nozzle for salt/calcium buildup and clean as needed. _________ 55 gal FOWLR, SeaClone 150 skimmer. 2" LS, 50# LR. 29Gal sump/fuge ViaAqua 2600 pump, chaeto, 1" sand, LR 2 Percula Clowns, Scissortail Goby, Black Birdwrasse, Keyhole angel, Lawnmower Blenny, Last edited by Michaelr5; 09-20-2005 at 02:55 PM.